Synchronized time shouldn't mean compromised design. SyncTech is engineered to integrate directly into select PPP Analog and Digital Clocks. As your needs grow, an unlimited number of additional receiver clocks and timers can be added.

300 Series 10" diameter	380 Series 12" diameter	500 Series 14" diameter	840 Series 14" diameter
880 Series 14" square	WC100 12" diameter	WC2001 2-1/2"h LED Display	Patient Message Center
Patient Information Boards		WC200 26w x 4-1/4h x 2d Other available sizes: 38w + 50w

SYNCTECH MASTER CLOCKS

SyncTech master clocks obtain accurate time from the U.S. time standard and can be configured with one of many time receivers. The SyncTech master clock uses a high power; UHF radio transmitter to send time updates to all clocks with a new FCC regulated business frequency. The SyncTech wireless system typically requires only one transmitter for complete RF coverage of your facility or campus. SyncTech is fully expandable allowing you to start with a system that fits your immediate needs, and with the flexibility to add more devices and wireless solutions as needed. The SyncTech master clock includes a powerful alarm schedule function, plus both wired and wireless alarm output. Any number of direct wired or wireless horns, bells, tone generators, and power relays may be used.

WCM
20-1/2w x 11-1/4h x 20d

GPS

Master Clock with GPS Time Receiver
GPS controlled master clocks receive time updates from the Global Positioning Satellites through a rooftop antenna with clear view of the sky. A cable connects the GPS antenna to the master clock. Included are an FCC Approved transceiver, dry-contact relay output, alarm schedule and control software, UPS battery backup, RF power meter, and tabletop cabinet. It also controls wired and wireless tone generators and relays. Available in 5, 25 and 70-watt power configurations for wide area coverage, with additional high watt transmitters available. Hi-gain antennas are available to boost the effective radiated power to 500 watts. 100-260 volts AC, 50 -60 cycles.

NTP ETHERNET
Master Clock with Ethernet Time Receiver
Ethernet (network time protocol) controlled master clock is our most popular configuration. The master clock obtains time from the facility computer timeserver, through the network, which does not require an outdoor antenna. Included are an FCC Approved transceiver, dry-contact relay output, alarm schedule and control software, UPS battery backup, RF power meter, and tabletop cabinet. It also controls wired and wireless tone generators and relays. Available in 5, 25 and 70-watt power configurations for wide area coverage, with additional high watt transmitters available. Hi-gain antennas are available to boost the effective radiated power to 500 watts. 100-260 volts AC, 50 -60 cycles.

CDMA
Code-Division Multiple Access
Master Clock with Cell Tower Time Receiver
CDMA (cell tower time format) controlled master clock obtains GPS time from the cellular network that has been re-transmitted and does not require an outdoor antenna. Included are an FCC Approved transceiver, dry-contact relay output, alarm schedule and control software, UPS battery backup, RF power meter, and tabletop cabinet. It also controls wired and wireless tone generators and relays. Available in 5, 25 and 70-watt power configurations for wide area coverage, with additional high watt transmitters available. Hi-gain antennas are available to boost the effective radiated power to 500 watts. 100-260 volts AC, 50 -60 cycles.